Comnet CNVETX1 Datasheet Page 112

  • Download
  • Add to my manuals
  • Print
  • Page
    / 122
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 111
INS_CNVETX1_REV– 06/10/13 PAGE 112
INSTALLATION AND OPERATION MANUAL CNVETX1
TECH SUPPORT: 1.888.678.9427
Board Configuration via Serial Port
By connecting an RS232 cable between a PC and the board’s serial port, you can access the
board and configure network parameters. This is useful in the unlikely event of the board being
inaccessible over the network.
You can access the board using a terminal emulation software such as HyperTerminal, which
is a Telnet communications utility running under the Windows operating system (not including
Windows Vista) for serial communication, or Tera Term, which is a free software terminal emulator
communications program for Windows, or Minicom (under Linux) on the PC.
If you don’t have an RS232 port on your PC, you can connect the server to the USB port on your
PC via a USB to RS232 cable.
Running HyperTerminal
To run the HyperTerminal application you need to set up and configure a HyperTerminal session
connection.
The following settings are required:
Bits per second: 115200; Data bits: 8; No parity; Stop bits: 1.
To run HyperTerminal:
1. Select
Start>
Programs>Accessories>Communications>HyperTerminal.
Figure 106: Running HyperTerminal
2. In the Connection Description window enter a name of the new connection and select an icon.
Page view 111
1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 121 122

Comments to this Manuals

No comments