Comnet CWFE8MS/DIN Technical Information download pdf (Page 67)

5.24 System Reboot

Reboot the switch in software reset. Select button to reboot the switch.

System Reboot interface

5.25 Rate Control

Set up every port’s bandwidth rate and packet limitation type.

 Limit Packet type: select the packet type that needs to be filtered. The packet

types have all types of packets, broadcast/multicast/unknown uni-cast packet,

broadcast/multicast packet, and broadcast packet only. The

broadcast/multicast/unknown uni-cast packet, broadcast/multicast packet, and

broadcast packet are only for ingress packets. The egress rate supports all type

packets.

 Band Width: Port1 ~ Port 8, supports port ingress and egress rate control. For

example, assume port 1 is 10Mbps. Users can set its effective egress rate at 1Mbps,

with its ingress rate is 500Kbps. The switch performs the ingress rate by counting

packets to meet the specified rate.

 Ingress: select the effective port ingress rate. The valid range value is 1MB,

2MB, 4MB, 8MB, 16MB, 32MB and 64MB. The default value is Disable.

 Egress: select the port effective ingress rate. The valid range value is 128kbps,

256Kbps, 512Kbps, 1MB, 2MB, 4MB, and 8MB. The default value is Disable.

 Select button to apply the configuration.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 73 74 75

No comments

Comnet CWFE8MS/DIN Technical Information Page 67