Comnet CWFE8MS/DIN Technical Information download pdf (Page 21)

3.4 Cabling

Use eight twisted-pair, Category 5 cables for the RJ-45 port connection. The cable

between the converter and the link partner (switch, hub, workstation, etc.) must be less

than 100 meters (328 ft.) long.

3.5 Wiring the Power Inputs

Please follow below steps to insert the power wire.

[NOTE] The wire gauge for the terminal block should be in the range of 12~ 24 AWG.

V- V+ V- V+

1. Insert the positive and negative wires into the V+ and V-

connector on the terminal block connector.

2. To tighten the wire-clamp screws for preventing the DC

wires to loose.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 74 75

No comments

Comnet CWFE8MS/DIN Technical Information Page 21