Comnet CWFE8MS/DIN Technical Information Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 75
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
10
2.5 LED Indicators
There are 7 diagnostic LEDs located on the front panel of the commercial switch. They
display real-time information about the system and operational status. The following
table provides a description of the status LEDs and their meaning for the switch.
LED Status Meaning
Green The switch is powered on.
Power
Off The switch is not powered on.
Green Power on
Power 1
Off No power input
Green Power on
Power 2
Off No power input
Yellow Power failure, UTP port failure or Fiber port failure
Fault
Off No Power failure, UTP port failure or Fiber port failure occurring
Green The switch is the master of X-Ring group.
R. M. (Ring
Master)
Off The switch is not the ring master in X-Ring group.
Green The port is linked.
Blinks The port is transmitting or receiving packets from the TX device.
LNK/ACT
(Port 7 & 8)
Off No device attached
Yellow The port is operating in full-duplex mode.
Blinks Collision of Packets occurs in the port.
FDX/COL
(Port 7 & 8)
Off The port in half-duplex mode or no device is attached
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 74 75

Comments to this Manuals

No comments