Comnet CWGE2FE24MODMS Technical Information download pdf (Page 27)

IP ADDRESS Configuration

The user can configure the IP Address Settings and DHCP client function

 DHCP Client: Enable or disable the DHCP client function. When DHCP client

function is enabled, the switch will be assigned an IP Address from the network

DHCP server. The default IP Address will be replaced by the IP Address that is

assigned by DHCP server. After the user selects the button, a popup dialog

box appears to inform the user that when the DHCP client is enabled, the current IP

Address will be lost and the user should find the new IP Address on the DHCP server.

 IP ADDRESS: Assigning the IP Address that the network is using. If the DHCP client

function is enabled, and then the user does not need to assign the IP Address

manually. The network DHCP server will assign the IP Address for the industrial

switch and display it here. The default IP Address is 192.168.10.1

 Subnet Mask: Assign the subnet mask of the IP Address. If DHCP client function is

enabled, then user the user does not need to assign the subnet mask manually.

 Gateway: Assign the network gateway for the industrial switch. The default gateway

is 192.168.10.254

 DNS1: Assign the primary DNS IP Address

 DNS2: Assign the secondary DNS IP Address

 And then, select

IP ADDRESS configuration interface

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 83 84

No comments

Comnet CWGE2FE24MODMS Technical Information Page 27